This parameter is the eastward component of the maximum wind gust since the previous post-processing step at a height of ten metres above the surface of the Earth.
This parameter is the northward component of the maximum wind gust since the previous post-processing step at a height of ten metres above the surface of the Earth.
https://codes.ecmwf.int/grib/param-db/?id=260647
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
58
0-2-22-10.0-103-2
gust-wind-speed-10m
The gust wind speed of horizontal air movement in metres per second at 10m.
Time integral of surface latent heat sublimation flux
https://codes.ecmwf.int/grib/param-db/?id=235071
Joule pr. square metres
J * m**-2
http://codes.wmo.int/common/unit/_J_m-2
72
0-1-1-2.0-103
relative-humidity-2m
The ratio of the partial pressure of water vapour to the equilibrium vapour pressure of water at the same temperature near the surface.
https://codes.ecmwf.int/grib/param-db/?id=260242
Percent
0-100
http://codes.wmo.int/common/unit/_percent
73
0-1-1-50.0-103
relative-humidity-50m
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice).
https://codes.ecmwf.int/grib/param-db/?id=157
Percent
0-100
http://codes.wmo.int/common/unit/_percent
74
0-1-1-100.0-103
relative-humidity-100m
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice).
https://codes.ecmwf.int/grib/param-db/?id=157
Percent
0-100
http://codes.wmo.int/common/unit/_percent
75
0-1-1-150.0-103
relative-humidity-150m
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice).
https://codes.ecmwf.int/grib/param-db/?id=157
Percent
0-100
http://codes.wmo.int/common/unit/_percent
76
0-1-1-250.0-103
relative-humidity-250m
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice).
https://codes.ecmwf.int/grib/param-db/?id=157
Percent
0-100
http://codes.wmo.int/common/unit/_percent
77
3-2-1--9.999E130-3
cloud-top-temperature
Temperature at top of cloud
-
Kelvin
K
http://codes.wmo.int/common/unit/K
78
3-6-3-0.0-103-1
direct-solar-exposure
Direct solar exposure is the time integral of direct solar irradiance. Direct Solar Irradiance is the solar flux per unit area received from the solid angle of the Sun's disc on a surface normal to the sun direction. Not present on first model step.
-
Joule pr. square metres
J * m**-2
http://codes.wmo.int/common/unit/_J_m-2
79
0-4-7-0.0-103-1
downward-short-wave-radiation-flux
Downward short-wave radiation flux. Not present on first model step.
https://codes.ecmwf.int/grib/param-db/260087
Watt pr. square metres
W * m**-2
https://codes.wmo.int/wmdr/unit/_W.m-2
80
0-17-193-0.0-103
probability-of-lightning
Probability of lightning
-
Percent / 100
0..1
http://codes.wmo.int/common/unit/_percent
81
0-1-192-0.0-103
precipitation-type
This parameter describes the type of precipitation at the surface, drizzle = 0, rain = 1, sleet = 2, snow = 3, freezing drizzle = 4, freezing rain = 5, graupel = 6, hail = 7
-
Precipitation type
precip_type
An index of the precipitation type, see parameter description for what values mean
82
0-1-69-0.0-1
total-column-cloud-liquid-water
This parameter is the amount of liquid water contained within cloud droplets in a column extending from the surface of the Earth to the top of the atmosphere.
https://codes.ecmwf.int/grib/param-db/?id=78
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
83
0-1-75-0.0-103
graupel-precipitation-rate
Graupel (snow pellets) precipitation rate
https://codes.ecmwf.int/grib/param-db/?id=500145
Kg pr. square metres
Kg * m**-2 * s**-1
https://codes.wmo.int/common/unit/_kg_m-2_s-1
84
0-4-3-0.0-103-1
global-radiation-flux
Global radiation flux is the total amount of solar radiation that reaches the Earths surface. It is the sum of the direct solar radiation and diffuse solar radiation, which is solar radiation scattered throughout the atmosphere.
https://codes.ecmwf.int/grib/param-db/?id=3117
Watt pr. square metres
W * m**-2
https://codes.wmo.int/wmdr/unit/_W.m-2
85
0-1-53-0.0-103-1
total-snowfall-rate-water-equivalent
Total snowfall rate water equivalent
https://codes.ecmwf.int/grib/param-db/?id=260049
Kg pr. square metres
Kg * m**-2 * s**-1
https://codes.wmo.int/common/unit/_kg_m-2_s-1
86
0-1-65-0.0-103-1
rain-precipitation-rate
Rain precipitation rate
https://codes.ecmwf.int/grib/param-db/?id=260058
Kg pr. square metres
Kg * m**-2 * s**-1
https://codes.wmo.int/common/unit/_kg_m-2_s-1
87
0-2-17-0.0-103-1
momentum-flux-u
Momentum flux, u component
https://codes.ecmwf.int/grib/param-db/?id=260062
Newton pr. square metres
N * m**-2
https://codes.wmo.int/common/unit/_N_m-2
88
0-2-18-0.0-103-1
momentum-flux-v
Momentum flux, v component
https://codes.ecmwf.int/grib/param-db/?id=260063
Newton pr. square metres
N * m**-2
https://codes.wmo.int/common/unit/_N_m-2
89
0-0-11-0.0-103-1
sensible-heat-net-flux
Sensible heat net flux
-
Watt pr. square metres
W * m**-2
https://codes.wmo.int/wmdr/unit/_W.m-2
90
0-5-4-0.0-103-1
upward-long-wave-radiation-flux
Upward long-wave radiation flux
https://codes.ecmwf.int/grib/param-db/?id=260098
Watt pr. square metres
W * m**-2
https://codes.wmo.int/wmdr/unit/_W.m-2
91
0-6-199-0.0-103
cloud-transmittance
Fraction of visible light that goes through the cloud layer.
This parameter is the eastward component of the maximum wind gust since the previous post-processing step at a height of ten metres above the surface of the Earth.
This parameter is the northward component of the maximum wind gust since the previous post-processing step at a height of ten metres above the surface of the Earth.
https://codes.ecmwf.int/grib/param-db/?id=260647
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
58
0-2-22-10.0-103-2
gust-wind-speed-10m
The gust wind speed of horizontal air movement in metres per second at 10m.
Time integral of surface latent heat sublimation flux
https://codes.ecmwf.int/grib/param-db/?id=235071
Joule pr. square metres
J * m**-2
http://codes.wmo.int/common/unit/_J_m-2
72
0-1-1-2.0-103
relative-humidity-2m
The ratio of the partial pressure of water vapour to the equilibrium vapour pressure of water at the same temperature near the surface.
https://codes.ecmwf.int/grib/param-db/?id=260242
Percent
0-100
http://codes.wmo.int/common/unit/_percent
73
0-1-1-50.0-103
relative-humidity-50m
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice).
https://codes.ecmwf.int/grib/param-db/?id=157
Percent
0-100
http://codes.wmo.int/common/unit/_percent
74
0-1-1-100.0-103
relative-humidity-100m
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice).
https://codes.ecmwf.int/grib/param-db/?id=157
Percent
0-100
http://codes.wmo.int/common/unit/_percent
75
0-1-1-150.0-103
relative-humidity-150m
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice).
https://codes.ecmwf.int/grib/param-db/?id=157
Percent
0-100
http://codes.wmo.int/common/unit/_percent
76
0-1-1-250.0-103
relative-humidity-250m
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice).
https://codes.ecmwf.int/grib/param-db/?id=157
Percent
0-100
http://codes.wmo.int/common/unit/_percent
77
3-2-1--9.999E130-3
cloud-top-temperature
Temperature at top of cloud
-
Kelvin
K
http://codes.wmo.int/common/unit/K
78
3-6-3-0.0-103-1
direct-solar-exposure
Direct solar exposure is the time integral of direct solar irradiance. Direct Solar Irradiance is the solar flux per unit area received from the solid angle of the Sun's disc on a surface normal to the sun direction. Not present on first model step.
-
Joule pr. square metres
J * m**-2
http://codes.wmo.int/common/unit/_J_m-2
79
0-4-7-0.0-103-1
downward-short-wave-radiation-flux
Downward short-wave radiation flux. Not present on first model step.
https://codes.ecmwf.int/grib/param-db/260087
Watt pr. square metres
W * m**-2
https://codes.wmo.int/wmdr/unit/_W.m-2
80
0-17-193-0.0-103
probability-of-lightning
Probability of lightning
-
Percent / 100
0..1
http://codes.wmo.int/common/unit/_percent
81
0-1-192-0.0-103
precipitation-type
This parameter describes the type of precipitation at the surface, drizzle = 0, rain = 1, sleet = 2, snow = 3, freezing drizzle = 4, freezing rain = 5, graupel = 6, hail = 7
-
Precipitation type
precip_type
An index of the precipitation type, see parameter description for what values mean
82
0-1-69-0.0-1
total-column-cloud-liquid-water
This parameter is the amount of liquid water contained within cloud droplets in a column extending from the surface of the Earth to the top of the atmosphere.
https://codes.ecmwf.int/grib/param-db/?id=78
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
83
0-1-75-0.0-103
graupel-precipitation-rate
Graupel (snow pellets) precipitation rate
https://codes.ecmwf.int/grib/param-db/?id=500145
Kg pr. square metres
Kg * m**-2 * s**-1
https://codes.wmo.int/common/unit/_kg_m-2_s-1
84
0-4-3-0.0-103-1
global-radiation-flux
Global radiation flux is the total amount of solar radiation that reaches the Earths surface. It is the sum of the direct solar radiation and diffuse solar radiation, which is solar radiation scattered throughout the atmosphere.
https://codes.ecmwf.int/grib/param-db/?id=3117
Watt pr. square metres
W * m**-2
https://codes.wmo.int/wmdr/unit/_W.m-2
85
0-1-53-0.0-103-1
total-snowfall-rate-water-equivalent
Total snowfall rate water equivalent
https://codes.ecmwf.int/grib/param-db/?id=260049
Kg pr. square metres
Kg * m**-2 * s**-1
https://codes.wmo.int/common/unit/_kg_m-2_s-1
86
0-1-65-0.0-103-1
rain-precipitation-rate
Rain precipitation rate
https://codes.ecmwf.int/grib/param-db/?id=260058
Kg pr. square metres
Kg * m**-2 * s**-1
https://codes.wmo.int/common/unit/_kg_m-2_s-1
87
0-2-17-0.0-103-1
momentum-flux-u
Momentum flux, u component
https://codes.ecmwf.int/grib/param-db/?id=260062
Newton pr. square metres
N * m**-2
https://codes.wmo.int/common/unit/_N_m-2
88
0-2-18-0.0-103-1
momentum-flux-v
Momentum flux, v component
https://codes.ecmwf.int/grib/param-db/?id=260063
Newton pr. square metres
N * m**-2
https://codes.wmo.int/common/unit/_N_m-2
89
0-0-11-0.0-103-1
sensible-heat-net-flux
Sensible heat net flux
-
Watt pr. square metres
W * m**-2
https://codes.wmo.int/wmdr/unit/_W.m-2
90
0-5-4-0.0-103-1
upward-long-wave-radiation-flux
Upward long-wave radiation flux
https://codes.ecmwf.int/grib/param-db/?id=260098
Watt pr. square metres
W * m**-2
https://codes.wmo.int/wmdr/unit/_W.m-2
91
0-6-199-0.0-103
cloud-transmittance
Fraction of visible light that goes through the cloud layer.
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice at 700 hPa.
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice at 850 hPa.
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice at 925 hPa.
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice at 700 hPa.
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice at 850 hPa.
This parameter is the water vapour pressure as a percentage of the value at which the air becomes saturated (the point at which water vapour begins to condense into liquid water or deposition into ice at 925 hPa.
Temperature in 2m height. Mean of ensemble members.
https://apps.ecmwf.int/codes/grib/param-db?id=167
Kelvin
K
http://codes.wmo.int/common/unit/K
2
dew-point-temperature-2m
2 metre dewpoint temperature. Mean of ensemble members.
https://codes.ecmwf.int/grib/param-db/?id=168
Kelvin
K
http://codes.wmo.int/common/unit/K
3
wind-speed-10m
The speed of horizontal air movement in metres per second at 10m. Mean of ensemble members.
https://apps.ecmwf.int/codes/grib/param-db?id=10
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
4
fraction-of-cloud-cover
Fraction of cloud cover. Mean of ensemble members.
https://codes.ecmwf.int/grib/param-db/?id=248
Percent / 100
0..1
http://codes.wmo.int/common/unit/_percent
5
total-precipitation
Total precipitation. Mean of ensemble members.
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
6
time-integral-of-total-solid-precipitation-flux
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that falls to the Earth's surface. Mean of ensemble members.
The gust wind speed of horizontal air movement in metres per second at 10m. Mean of ensemble members.
https://codes.ecmwf.int/grib/param-db/?id=260065
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
9
relative-humidity-2m
The ratio of the partial pressure of water vapour to the equilibrium vapour pressure of water at the same temperature near the surface. Mean of ensemble members.
https://codes.ecmwf.int/grib/param-db/?id=260242
Percent
0-100
http://codes.wmo.int/common/unit/_percent
10
total-column-vertically-integrated-water-vapour
This parameter is the total amount of water vapour in a column extending from the surface of the Earth to the top of the atmosphere. Mean of ensemble members.
Temperature in 2m height, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
https://apps.ecmwf.int/codes/grib/param-db?id=167
Kelvin
K
http://codes.wmo.int/common/unit/K
2
temperature-2m-10percentile
Temperature in 2m height, 10 percentile, which means that 10% of the ensemble members are below the value.
https://apps.ecmwf.int/codes/grib/param-db?id=167
Kelvin
K
http://codes.wmo.int/common/unit/K
3
temperature-2m-25percentile
Temperature in 2m height, 25 percentile, which means that 25% of the ensemble members are below the value.
https://apps.ecmwf.int/codes/grib/param-db?id=167
Kelvin
K
http://codes.wmo.int/common/unit/K
4
temperature-2m-50percentile
Temperature in 2m height, 50 percentile, which means that 50% of the ensemble members are below the value.
https://apps.ecmwf.int/codes/grib/param-db?id=167
Kelvin
K
http://codes.wmo.int/common/unit/K
5
temperature-2m-75percentile
Temperature in 2m height, 75 percentile, which means that 75% of the ensemble members are below the value.
https://apps.ecmwf.int/codes/grib/param-db?id=167
Kelvin
K
http://codes.wmo.int/common/unit/K
6
temperature-2m-90percentile
Temperature in 2m height, 90 percentile, which means that 90% of the ensemble members are below the value.
https://apps.ecmwf.int/codes/grib/param-db?id=167
Kelvin
K
http://codes.wmo.int/common/unit/K
7
temperature-2m-100percentile
Temperature in 2m height, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
https://apps.ecmwf.int/codes/grib/param-db?id=167
Kelvin
K
http://codes.wmo.int/common/unit/K
8
relative-humidity-2m-0percentile
The ratio of the partial pressure of water vapour to the equilibrium vapour pressure of water at the same temperature near the surface, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
https://codes.ecmwf.int/grib/param-db/?id=260242
Percent
0-100
http://codes.wmo.int/common/unit/_percent
9
relative-humidity-2m-10percentile
The ratio of the partial pressure of water vapour to the equilibrium vapour pressure of water at the same temperature near the surface, 10 percentile, which means that 10% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=260242
Percent
0-100
http://codes.wmo.int/common/unit/_percent
10
relative-humidity-2m-25percentile
The ratio of the partial pressure of water vapour to the equilibrium vapour pressure of water at the same temperature near the surface, 25 percentile, which means that 25% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=260242
Percent
0-100
http://codes.wmo.int/common/unit/_percent
11
relative-humidity-2m-50percentile
The ratio of the partial pressure of water vapour to the equilibrium vapour pressure of water at the same temperature near the surface, 50 percentile, which means that 50% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=260242
Percent
0-100
http://codes.wmo.int/common/unit/_percent
12
relative-humidity-2m-75percentile
The ratio of the partial pressure of water vapour to the equilibrium vapour pressure of water at the same temperature near the surface, 75 percentile, which means that 75% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=260242
Percent
0-100
http://codes.wmo.int/common/unit/_percent
13
relative-humidity-2m-90percentile
The ratio of the partial pressure of water vapour to the equilibrium vapour pressure of water at the same temperature near the surface, 90 percentile, which means that 90% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=260242
Percent
0-100
http://codes.wmo.int/common/unit/_percent
14
relative-humidity-2m-100percentile
The ratio of the partial pressure of water vapour to the equilibrium vapour pressure of water at the same temperature near the surface, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
https://codes.ecmwf.int/grib/param-db/?id=260242
Percent
0-100
http://codes.wmo.int/common/unit/_percent
15
dew-point-temperature-2m-0percentile
2 metre dewpoint temperature, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
https://codes.ecmwf.int/grib/param-db/?id=168
Kelvin
K
http://codes.wmo.int/common/unit/K
16
dew-point-temperature-2m-10percentile
2 metre dewpoint temperature, 10 percentile, which means that 10% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=168
Kelvin
K
http://codes.wmo.int/common/unit/K
17
dew-point-temperature-2m-25percentile
2 metre dewpoint temperature, 25 percentile, which means that 25% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=168
Kelvin
K
http://codes.wmo.int/common/unit/K
18
dew-point-temperature-2m-50percentile
2 metre dewpoint temperature, 50 percentile, which means that 50% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=168
Kelvin
K
http://codes.wmo.int/common/unit/K
19
dew-point-temperature-2m-75percentile
2 metre dewpoint temperature, 75 percentile, which means that 75% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=168
Kelvin
K
http://codes.wmo.int/common/unit/K
20
dew-point-temperature-2m-90percentile
2 metre dewpoint temperature, 90 percentile, which means that 90% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=168
Kelvin
K
http://codes.wmo.int/common/unit/K
21
dew-point-temperature-2m-100percentile
2 metre dewpoint temperature, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
https://codes.ecmwf.int/grib/param-db/?id=168
Kelvin
K
http://codes.wmo.int/common/unit/K
22
wind-speed-10m-0percentile
The speed of horizontal air movement in metres per second at 10m, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
https://apps.ecmwf.int/codes/grib/param-db?id=10
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
23
wind-speed-10m-10percentile
The speed of horizontal air movement in metres per second at 10m, 10 percentile, which means that 10% of the ensemble members are below the value.
https://apps.ecmwf.int/codes/grib/param-db?id=10
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
24
wind-speed-10m-25percentile
The speed of horizontal air movement in metres per second at 10m, 25 percentile, which means that 25% of the ensemble members are below the value.
https://apps.ecmwf.int/codes/grib/param-db?id=10
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
25
wind-speed-10m-50percentile
The speed of horizontal air movement in metres per second at 10m, 50 percentile, which means that 50% of the ensemble members are below the value.
https://apps.ecmwf.int/codes/grib/param-db?id=10
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
26
wind-speed-10m-75percentile
The speed of horizontal air movement in metres per second at 10m, 75 percentile, which means that 75% of the ensemble members are below the value.
https://apps.ecmwf.int/codes/grib/param-db?id=10
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
27
wind-speed-10m-90percentile
The speed of horizontal air movement in metres per second at 10m, 90 percentile, which means that 90% of the ensemble members are below the value.
https://apps.ecmwf.int/codes/grib/param-db?id=10
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
28
wind-speed-10m-100percentile
The speed of horizontal air movement in metres per second at 10m, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
https://apps.ecmwf.int/codes/grib/param-db?id=10
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
29
fraction-of-cloud-cover-0percentile
Fraction of cloud cover, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
https://codes.ecmwf.int/grib/param-db/?id=248
Percent / 100
0..1
http://codes.wmo.int/common/unit/_percent
30
fraction-of-cloud-cover-10percentile
Fraction of cloud cover, 10 percentile, which means that 10% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=248
Percent / 100
0..1
http://codes.wmo.int/common/unit/_percent
31
fraction-of-cloud-cover-25percentile
Fraction of cloud cover, 25 percentile, which means that 25% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=248
Percent / 100
0..1
http://codes.wmo.int/common/unit/_percent
32
fraction-of-cloud-cover-50percentile
Fraction of cloud cover, 50 percentile, which means that 50% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=248
Percent / 100
0..1
http://codes.wmo.int/common/unit/_percent
33
fraction-of-cloud-cover-75percentile
Fraction of cloud cover, 75 percentile, which means that 75% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=248
Percent / 100
0..1
http://codes.wmo.int/common/unit/_percent
34
fraction-of-cloud-cover-90percentile
Fraction of cloud cover, 90 percentile, which means that 90% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=248
Percent / 100
0..1
http://codes.wmo.int/common/unit/_percent
35
fraction-of-cloud-cover-100percentile
Fraction of cloud cover, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
https://codes.ecmwf.int/grib/param-db/?id=248
Percent / 100
0..1
http://codes.wmo.int/common/unit/_percent
36
total-precipitation-1h-0percentile
Total precipitation last hour, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
37
total-precipitation-1h-10percentile
Total precipitation last hour, 10 percentile, which means that 10% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
38
total-precipitation-1h-25percentile
Total precipitation last hour, 25 percentile, which means that 25% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
39
total-precipitation-1h-50percentile
Total precipitation last hour, 50 percentile, which means that 50% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
40
total-precipitation-1h-75percentile
Total precipitation last hour, 75 percentile, which means that 75% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
41
total-precipitation-1h-90percentile
Total precipitation last hour, 90 percentile, which means that 90% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
42
total-precipitation-1h-100percentile
Total precipitation last hour, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
43
total-precipitation-6h-0percentile
Total precipitation last 6 hours, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
44
total-precipitation-6h-10percentile
Total precipitation last 6 hours, 10 percentile, which means that 10% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
45
total-precipitation-6h-25percentile
Total precipitation last 6 hours, 25 percentile, which means that 25% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
46
total-precipitation-6h-50percentile
Total precipitation last 6 hours, 50 percentile, which means that 50% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
47
total-precipitation-6h-75percentile
Total precipitation last 6 hours, 75 percentile, which means that 75% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
48
total-precipitation-6h-90percentile
Total precipitation last 6 hours, 90 percentile, which means that 90% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=228228
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
49
total-precipitation-6h-100percentile
Total precipitation last 6 hours, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last hour, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value)..
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last hour, 10 percentile, which means that 10% of the ensemble members are below the value.
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last hour, 25 percentile, which means that 25% of the ensemble members are below the value.
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last hour, 50 percentile, which means that 50% of the ensemble members are below the value.
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last hour, 75 percentile, which means that 75% of the ensemble members are below the value.
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last hour, 90 percentile, which means that 90% of the ensemble members are below the value.
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last hour, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last 6 hours, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last 6 hours, 10 percentile, which means that 10% of the ensemble members are below the value.
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last 6 hours, 25 percentile, which means that 25% of the ensemble members are below the value.
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last 6 hours, 50 percentile, which means that 50% of the ensemble members are below the value.
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last 6 hours, 75 percentile, which means that 75% of the ensemble members are below the value.
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last 6 hours, 90 percentile, which means that 90% of the ensemble members are below the value.
This parameter is the accumulated sum of all types of solid water, e.g. graupel, snow and hail that has fallen to the Earth's surface during the last 6 hours, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
This parameter is the total amount of water vapour in a column extending from the surface of the Earth to the top of the atmosphere, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
This parameter is the total amount of water vapour in a column extending from the surface of the Earth to the top of the atmosphere, 10 percentile, which means that 10% of the ensemble members are below the value.
This parameter is the total amount of water vapour in a column extending from the surface of the Earth to the top of the atmosphere, 25 percentile, which means that 25% of the ensemble members are below the value.
This parameter is the total amount of water vapour in a column extending from the surface of the Earth to the top of the atmosphere, 50 percentile, which means that 50% of the ensemble members are below the value.
This parameter is the total amount of water vapour in a column extending from the surface of the Earth to the top of the atmosphere, 75 percentile, which means that 75% of the ensemble members are below the value.
This parameter is the total amount of water vapour in a column extending from the surface of the Earth to the top of the atmosphere, 90 percentile, which means that 90% of the ensemble members are below the value.
This parameter is the total amount of water vapour in a column extending from the surface of the Earth to the top of the atmosphere, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
https://codes.ecmwf.int/grib/param-db/?id=137
Kg pr. square metres
Kg * m**-2
http://codes.wmo.int/common/unit/_kg_m-2
71
visibility-0percentile
Visibility, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
https://codes.ecmwf.int/grib/param-db/?id=3020
Metre
m
http://codes.wmo.int/common/unit/_m
72
visibility-10percentile
Visibility, 10 percentile, which means that 10% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=3020
Metre
m
http://codes.wmo.int/common/unit/_m
73
visibility-25percentile
Visibility, 25 percentile, which means that 25% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=3020
Metre
m
http://codes.wmo.int/common/unit/_m
74
visibility-50percentile
Visibility, 50 percentile, which means that 50% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=3020
Metre
m
http://codes.wmo.int/common/unit/_m
75
visibility-75percentile
Visibility, 75 percentile, which means that 75% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=3020
Metre
m
http://codes.wmo.int/common/unit/_m
76
visibility-90percentile
Visibility, 90 percentile, which means that 90% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=3020
Metre
m
http://codes.wmo.int/common/unit/_m
77
visibility-100percentile
Visibility, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
https://codes.ecmwf.int/grib/param-db/?id=3020
Metre
m
http://codes.wmo.int/common/unit/_m
78
gust-wind-speed-10m-1h-0percentile
The gust wind speed of horizontal air movement in metres per second at 10m last hour, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
https://codes.ecmwf.int/grib/param-db/?id=260065
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
79
gust-wind-speed-10m-1h-10percentile
The gust wind speed of horizontal air movement in metres per second at 10m last hour, 10 percentile, which means that 10% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=260065
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
80
gust-wind-speed-10m-1h-25percentile
The gust wind speed of horizontal air movement in metres per second at 10m last hour, 25 percentile, which means that 25% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=260065
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
81
gust-wind-speed-10m-1h-50percentile
The gust wind speed of horizontal air movement in metres per second at 10m last hour, 50 percentile, which means that 50% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=260065
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
82
gust-wind-speed-10m-1h-75percentile
The gust wind speed of horizontal air movement in metres per second at 10m last hour, 75 percentile, which means that 75% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=260065
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
83
gust-wind-speed-10m-1h-90percentile
The gust wind speed of horizontal air movement in metres per second at 10m last hour, 90 percentile, which means that 90% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/?id=260065
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
84
gust-wind-speed-10m-1h-100percentile
The gust wind speed of horizontal air movement in metres per second at 10m last hour, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
https://codes.ecmwf.int/grib/param-db/?id=260065
Metres pr. second
m s**-1
http://codes.wmo.int/common/unit/_m_s-1
85
cloud-base-0percentile
Cloud-base, 0 percentile, which means that 0% of the ensemble members are below the value (which makes this one the minimum value).
https://codes.ecmwf.int/grib/param-db/260107
Metre
m
http://codes.wmo.int/common/unit/_m
86
cloud-base-10percentile
Cloud-base, 10 percentile, which means that 10% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/260107
Metre
m
http://codes.wmo.int/common/unit/_m
87
cloud-base-25percentile
Cloud-base, 25 percentile, which means that 25% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/260107
Metre
m
http://codes.wmo.int/common/unit/_m
88
cloud-base-50percentile
Cloud-base, 50 percentile, which means that 50% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/260107
Metre
m
http://codes.wmo.int/common/unit/_m
89
cloud-base-75percentile
Cloud-base, 75 percentile, which means that 75% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/260107
Metre
m
http://codes.wmo.int/common/unit/_m
90
cloud-base-90percentile
Cloud-base, 90 percentile, which means that 90% of the ensemble members are below the value.
https://codes.ecmwf.int/grib/param-db/260107
Metre
m
http://codes.wmo.int/common/unit/_m
91
cloud-base-100percentile
Cloud-base, 100 percentile, which means that 100% of the ensemble members are below the value (which makes this one the maximum value).
The probability of more than 1mm of the accumulated sum of all types of solid water, e.g. graupel, snow and hail that falls to the Earth's surface within the last 6 hours.
The probability of more than 5mm of the accumulated sum of all types of solid water, e.g. graupel, snow and hail that falls to the Earth's surface within the last 6 hours.
The probability of more than 10mm of the accumulated sum of all types of solid water, e.g. graupel, snow and hail that falls to the Earth's surface within the last 6 hours.
The probability of more than 15mm of the accumulated sum of all types of solid water, e.g. graupel, snow and hail that falls to the Earth's surface within the last 6 hours.